Glu Guru May 1 2009 Journal

The Glu Guru welcomes you to the Adhesive Focus Monthly News Journal
where our Glu Guru team features information helpful to your production
and packaging challenges.
Mike Cooper, President

New EASY-PAC Package Sealing Solution from National Adhesives
The Complete Solution to End-of-Line Packaging Problems

SPECIAL OFFER: The EASY-PAC equipment is yours to use WITHOUT CHARGE , as long as you continue to purchase EASY-PAC hot melt. Call 1-800-323-5158 for more information.

The EASY-PAC package sealing solution includes these three valuable components:

Complete equipment package

200ºF (95ºF) hot melt

3-year equipment warranty and 3-year guarantee on replacement parts

New EASY-PAC is a complete hot melt and application
system

Here is how you benefit:
●Eliminates Char to keep your lines running
●Maximum packaging line uptime
●Lowest cost in use
●Hassle Free Sealing
●Premium operator safety
Here is what you get:
Complete equipment package
200°F (98°C) hot melt with full case and carton sealing functionality
3 Year warranty on hot melt unit and replacement parts

After 1000 hours of pot life, clean-running
EASY-PAC (left) does not char, but look
what happens to a 350º F (180º C) hot melt.

When you switch to EASY-PAC, you get off to a fresh start because National gives you clean, all-new hoses, nozzles and modules, along with a char-free adhesive. So, without char - the biggest enemy of package sealing efficiency and downtime – you will greatly improve your package line efficiencies. Char is the substance produced by overheated hot melt or outside contaminants in the melt unit or hoses that can clog filters, hoses and nozzles and bring your operation to a standstill.

EASY-PAC eliminates char because the system provides full case and carton sealing functionality at the lowest application temperature on the market, 200º F (95º C). At 200º F (95º C), char never has a chance to form.

You can achieve higher levels of safety in your package sealing operating when you switch to EASY-PAC.

Lower operating temperature - 200ºF (95ºC)

Closed system – no exposure to molten adhesive

Less exposure to hot equipment

Fewer, less severe burns and injuries.

Less opportunities to be exposed to hot parts due to a dramatic drop in nozzle, module and filter failures

SPECIAL OFFER: Spend zero on application equipment & replacement parts....You get a new hot melt dispensing unit with integrated Autofill system, new hoses, nozzles and modules and a storage bin. Our replacement parts guarantee assures you that you do not have to pay for parts. And, the three-year warranty on the dispensing unit is the longest in the industry.

The EASY-PAC equipment is yours to use WITHOUT CHARGE, as long as you continue to purchase EASY-PAC hot melt. Call 1-800-323-5158 for more information.

For more information: Call 1-800-323-5158 Contact Us
Visit our website at: www.gluguru.com