Araldite2015

Press this button if you would like an Adhesive Technician to call you
or Contact Us via Email

PRICES/ORDERING

Adhesive
Calculation
Table(pdf)

Spanish Edition

Adhesive
HotLines
U.S. and Canada
1-800-323-5158
Fax
1-800-353-7770

World Wide
01-847-437-7773
Fax
01-847-437-8006

Minimum Order
$150 US
on all
Cash
Credit Card
or
Charge
orders

ENTER HERE for information on the ISO 9001:2000...The Standard for World Class Quality and how it protects our customers.

ARALDITE 2015 EPOXY

Composites bonding…with Araldite 2015 epoxy. It’s a tough, resilient paste that is ideal for use on thermoset composites of all types, particularly on fiberglass-reinforced epoxies. The same adhesive works well on metals and combinations of the dissimilar materials. If you haven’t been promoting this great adhesive, start today!

The thixotropic, gap-filling adhesive can be applied up to a 0.39-in. (10-mm) thickness. It has a 35-minute gel time and attains handling strength after only four hours at room temperature. Once cured, Araldite 2015 produces joints with high shear strength, good peel strength and good resistance to chemicals, heat, water and impact.

Like other Araldite 2000 epoxies, the adhesive is supplied in 50 and 200ml cartridges as well as working packs and pails.

Key Handling Properties

	Gel time: 35 minutes
	Mix ratio: 1:1 pbv
	Easy to apply with a spatula

Other Special Features

	Araldite 2015 is beige
	It has a lap shear strength of 3,200 psi at room temperature and 1,050 psi after a postcure
	Roller peel is 25 pli

Typical Properties of Araldite 2015 Epoxy

Product

Work
Life

Mixed
Viscosity,
cps @ 77ºF*

Mix
Ratio,
pbv

Min. Cure Time,
Hrs. @ 77ºF*
(Min. @ 212ºF*)

Peel
Strength,
pli

Lap Shear
Strength, psi
@ 77ºF*

Max. Service
Temperature,
ºF (ºC)

Araldite 2015

35 min.

Paste

1:1

10 (7)

3,200 (1,050**)

176 (80)

* 77ºF=25ºC; 212ºF=100ºC
** After a postcure

Back to Araldite Menu




IMPORTANT: The following supercedes Buyer’s documents. SELLER MAKES NO REPRESENTATION OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No statements herein are to be construed as inducements to infringe any relevant patent.	Under no circumstances shall Seller be liable for incidental, consequential or indirect damages for alleged negligence, breach of warranty, strict liability, tort or contract arising in connection with the product(s). Buyer’s sole remedy and Seller’s sole liability for any claims shall be Buyer’s purchase price. Data and results are based on controlled or	lab work and must be confirmed by Buyer by testing for its intended conditions of use. The products described herein have not been tested for, and are therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses for which implantation within the human body is intended.