You may print this page for your file

Hysol ® 1942
Hot Melt Adhesive


Description
Hysol 1942 is a medium setting EVA based adhesive used extensively in general purpose applications. It exhibits excellent adhesion to wood and many plastics, such as, nylon, Polycarbonate, PVC, polystyrene, ABS and acrylic.

Typical Properties
                                                                                                        Test Method
Softening Point, F                                      198                              ASTM E28-67
Viscosity @ 350F, centipoise                     5,000                         *Thermosel
Specific Gravity, g/cc                                   0.96                            ASTM 1475
Tensile Strength, psi                                   250                             ASTM D 638-68
Elongation, %                                            500                             ASTM D 638-68
Heat Resistance, F                                       142                             Hysol HTPSK-1
Open Time, seconds                                   30
*Brookfield RVT, Spindle SC4-27

Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations.  There are many excellent bulk hot melt applicators available.

Availability
Available forms include pellets and shaped forms for hand held applicators.

FDA Status
Ingredients in this product are listed under Food and Drug Administration CFR 175.105, Adhesives.

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com