You may print this page for your file
You may print this page for your file
Hysol ® 236
Hot Melt Adhesive
Description
Hysol 236 is an EVA based adhesive of medium viscosity where a clear, tough flexible hot melt is needed with superior wetting properties.
Typical Properties
Test Method
Softening Point, F 180 ASTM E28-67
Viscosity @ 350F, centipoise 8,500 *Thermosel
Specific Gravity, g/cc 0.99 ASTM 1475
Tensile Strength, psi 213 ASTM D 638-68
Elongation, % 450 ASTM D 638-68
Heat Resistance, F 140 Hysol HTPSK-1
Open Time, seconds 25
*Brookfield RVT, Spindle SC4-27
Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations. There are many excellent bulk hot melt applicators available.
Avail
Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call
800.323.5158 now and let us help you with your adhesive needs.
DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate.
Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request.
For
more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email
mike@on-hand.com