You may print this page for your file

Hysol ® CoolMelt
Hot Melt Adhesive

Description
Hysol CoolMelt is a very low viscosity, flexible adhesive designed for applications at low temperatures. It is ideal for bonding heat sensitive parts and also for close work where its use greatly reduces the risk of burns from accidental contact with molten adhesive. CoolMelt is recommended for carton closing, bonding EPS or Styrofoam, polyethylene and other plastics and softwoods.

Typical Properties
                                                                                                                        Test Method
Softening Point, °F                                          208                                        ASTM E 28
Viscosity @ 350°F, centipoise                         7200                                      ASTM D 32-36
Tensile Strength, psi                                        195                                        ASTM D 638
Elongation %                                                   800                                        ASTM D 638   
Heat Resistance, °F                                           140                                        Hysol HTPSK-1
Open Time, (sec)                                              15

Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations.  There are many excellent bulk applicators available.  Your local Hysol salesman will be happy to help you with your selection.

Availability
Available in pellets and shaped forms for hand held applicators.

FDA Status
Ingredients in this product are listed under the Food and Drug Administration CFR 175.105, Adhesives

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com