Press this button if you would like an Adhesive Technician to call you
or Contact Us via Email

Adhesive
Calculation
Table(pdf)

Spanish Edition To Home Page   Email

To Adhesive Technical Data Menu

To GluGuru™ Home Page
 

Product Description and Recommended Use

SICOMET 85 is the standard for bonding metals to rubber as well as ceramic and ferrite materials. Resistant to amny solvents and chemicals, this adhesive features a low viscosity for easy handling and is best suited to close fitting parts.	SICOMET 5010 is a high viscosity adhesive with a faster setting time than most high viscosity cyanoacrylates. It offers high elasticity, giving excellent bonds to dissimilar or porous materials.Facilitates gap-filling and is high temperature resistance to 250 F makes it useful in loudspeaker assembly.
SICOMET 7000 bonds metals to themselves or other substrates. It has a medium and allows some positioning time. It is especially useful for bonding slightly dirty or oily metals, and offers better moisture resistance than most cyanoacrylates.	SICOMET 5044 is suggested for bonding plastics or porous materials where time is needed for part positioning. This product offers high elasticiyt and is more suitable for bonding dissimilar materials with different coefficients of thermal expansion. This adhesive provides gap-filling and optimum flow control.
SICOMET 99 is a high viscosity for bonding metals where gap-filling is needed. Slow setting, it allows maximum part positioning time. It is well suited for bonding non-ferrous metals, giving good impact and vibration resistance and thermostability.	SICOMET 65 has a very high viscosity with a medium set speed. It's suggested for bonding metals or plastics where maximum gap-filling or drop-control is needed. Testing indicates good flexibility and resistance to changing environments. With FASTAC accelerator, gap size may be increased.
SICOMET 40 is a wicking grade adhesive designed for bonding preassembled plastic parts. It features a very fast setting time and gives a good wetting on difficult to bond plastics. It also has been useful for bonding transformer laminates.	SICOMET POWERGEL is an extremely high viscosity, medium fixturing, single component, industrial quality instant adhesive. Formulated to a clear gel and featuring non-stringing, non-migrating properties. It is suitable for most substrates.
SICOMET 5023 features a moderately slow setting speed and veery low viscosity. An excellent product for post-assembly where the adhesive must penetrate deeply into the preassembled parts. This product is non-stringing and can be used in normal cyanoacrylate dispensing equipment.	SICOMET 5181 is a high viscosity black adhesive with a slow set speed. It is suitable for bonding porous substrates and materials with different coefficients of thermal expansion. The repositioning of parts and inspection of bonded assemblies is alos possible.
SICOMET 50 is the standard for bonding plastics and offers a fast overall cure speed. It is a versitale adhesive and gives good thermal, climatic and impact resistance. This product elasticity makes it espevcially suitable for bonding dissimilar materials.	SICOMET 8300 is the standard adhesive for bonding O-rings and rubber materials. It features a low viscosity and fast setting time, joining hard to bond elastomers. It is highly resistant to aging, weathering and plasticizer migration.
SICOMET 63 is a fast curing adhesive with a medium viscosity, offering exceptional adhesion to plastic parts through good wetting properties. An ideal adhesive for filling small gaps on plastic surfaces.	SICOMET 9000 Methoxyethyl is a low viscosity adhesive that features no odor, non-frosting characteristics and formulated for low blooming applications.
SICOMET 8400 is a fast curing, medium viscosity material for the adhesion of most plastics and elastomers. It provides excellent drop control and the ability to bridge small tolerances. An exceelnt material for bonding most types of porous substances, such as foam rubber.	SICOMET 9010 Methoxyethyl is a medium viscosity adhesive featurting no odor, non-frosting characteristics where cosmetically critical bonding methods are required. Eliminates the need for special ventilation.
SICOMET 77 is a fast curing, high viscosity material for plastic bonding and is suitable where high impact resistance is desired. A good general purpose adhesive providing some gap-filling. It is useful for a variety of materials such as wood, cork and leather.	SICOMET 9020 Methoxyethyl is a high viscosity adhesive featuring no odor, non-frosting characteristics where cosmetically critical bonding methods are required. Eliminates the need for spevcial ventilation.

Product Specifications

SICOMET Adhesive	Ester Base	Apperance	Ave. Viscosity cp@ 68F	Set Time in Seconds-Metal	Set Time in Seconds-Plastic	Set Time in Seconds-Rubber	MIL Spec Mil-A-46050C
85	Methyl	Clear	20	15-20	2-3	N/A	Type 1,Class  1
7000	Methyl	Clear	90	20-25	3-4	N/A	Type 1 Class 2
99	Methyl	Clear	2,000	30-40	4-5	N/A	Type 1, Class3
40	Ethyl	Clear	5	10-15	2-3	1-2	Type ll, Class 1
5023	Ethyl	Clear	5	40-60	15-20	8-10	Type ll, Class 1
50	Ethyl	Clear	30	15-25	3-4	2-3	Type ll. Class 1
63	Ethyl	Clear	100	15-20	4-5	2-3	Type ll, Class 2
8400	Ethyl	Clear	210	15-20	4-5	2-3	Type ll, Class 2
77	Ethyl	Clear	1,100	25-35	5-6	4-6	Type ll, Class 3
5019	Ethyl	Clear	2,400	25-35	6-10	8-10	Type ll, Class 3
5044	Ethyl	Clear	3,200	25-40	10-15	8-10	Type ll, Class 3
65	Ethyl	Clear	20,000	50-80	15-20	12-15	Type ll, Class 4
SICOMET POWERGEL	Ethyl	Clear	Thixotropic	30-50	20-25	12-15	Type ll, Class 4
5181	Ethyl	Black	2,400	80-120	30-35	30-35	N/A
8300	Ethyl	Clear	20	N/A	2-3	1-2	Type ll, Class 1
9000	Methoxyethyl	Clear	15	25-35	10-15	3-5	N/A
9010	Methoxyethyl	Clear	150	25-40	10-20	5-10	N/A
9020	Methoxyethyl	Clear	1100	25-40	10-20	5-10	N/A

For more information contact Adhesive Tech Center at 1-800-323-5158